AFM8* Adjustable Miniature 8 Indent Lower Range Crimp Tool
Adjustable Miniature 8 Indent Lower Range Crimp Tool
| Power Type | Manual |
|---|---|
| Shipping Weight | 0.75 |
| Crimp Range (AWG) with mm² | 20-32awg 0.03-0.52mm² |
| Positioner | K Serise,UNVIVERSAL |
| Use with tool | AFM8 M22520/2-01 |
| Brand | Cablegia |
| Crimp Type | Indent |
| Number of Indents | 8 |
Qualified to AS22520/2, the Cablegia® AFM8® is designed for most of the miniature and sub-miniature connector types that are so widely used in electronic systems. The AFM8; meets the need for a miniature tool accommodating wire sizes 20 through 32 AWG.
The AFM8 gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength. The cycle-controlled precision ratchet assures consistently accurate crimps every time. The tool frame has a built-in 8 step selector knob for ease in dialing the correct crimp depth setting for the wire being used.
Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates the selector position. The positioner is easily removed and changed.
Periodic gaging is recommended to insure accurate calibration. This is easily accomplished with the M22520/3-1 “GO/NO-GO” gage (Cablegia® part no. G125) on SEL setting #8. The AFM8 is 6 3/4" in length and weighs approximately 10 oz.
Other than keeping the tool clean and properly stored when not in use, no operator maintenance is required.
System usage notes
- The frame alone cannot crimp. The AFM8 must be fitted with a K-series positioner (M22520/2-xx). Positioners of the AF8 (TH/TP/UH2-5) or MH860 (86 series) are not interchangeable.
- K numbers are serial numbers, not wire sizes. Select the positioner from the contact part number, then set the SEL knob to the value printed on the positioner data plate.
- Machined contacts only. This tool family is designed for machined pin and socket contacts (M39029 series). For stamped and formed contacts, insulated terminals, splices and coax, see the corresponding die-type tool families.
- Periodic calibration. Verify crimp-head closure with the G125 gage at SEL 8, or with the 88-200 full-cycle gage set covering SEL 1-8.
| Power Type | Manual |
|---|---|
| Shipping Weight | 0.75 |
| Crimp Range (AWG) with mm² | 20-32awg 0.03-0.52mm² |
| Positioner | K Serise,UNVIVERSAL |
| Use with tool | AFM8 M22520/2-01 |
| Brand | Cablegia |
| Crimp Type | Indent |
| Number of Indents | 8 |
有限保修与责任限制
退货政策
适用端子 / 接触件与标准
数据来自本站工具检索数据库，点击件号可查看详情。
| 端子 / 接触件件号 | 接触件规格 | 适用线径 (AWG) | 标准类型 | 推荐用法 |
|---|---|---|---|---|
| 88-200 | — | — | 🌐 其他 / 国际通用 | 88-200 full-cycle gage set SEL 1-8 - for AFM8 |
| G125 | — | — | 🌐 其他 / 国际通用 | G125 tool calibration gage - AFM8 check position SEL 8 |
| M22520/2-01 | 20 | — | 🇺🇸 美军标准 | AFM8 crimp tool |
| M22520/2-02 | — | — | 🇺🇸 美军标准 | K1S Positioner - for AFM8 (M22520/2-01) |
| M22520/2-03 | — | — | 🇺🇸 美军标准 | K60S Positioner - for AFM8 (M22520/2-01) |
| M22520/2-04 | — | — | 🇺🇸 美军标准 | K151 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-05 | — | — | 🇺🇸 美军标准 | K3 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-06 | — | — | 🇺🇸 美军标准 | K41 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-07 | — | — | 🇺🇸 美军标准 | K40 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-08 | — | — | 🇺🇸 美军标准 | K13-1 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-09 | — | — | 🇺🇸 美军标准 | K42 Positioner - for AFM8 (M22520/2-01) |
| M22520/2-10 | — | — | 🇺🇸 美军标准 | K43 Positioner - for AFM8 (M22520/2-01) |
相关产品
K43 Positioner
K342 Positioner
K343 Positioner