88-200 Full-Cycle Gage Set (SEL 1-8) for AFM8
Full-cycle GO / NO-GO calibration gage set covering all eight selector positions (SEL 1-8) of the AFM8 hand crimp tool (M22520/2-01). For periodic tool calibration and metrology.
88-200 full-cycle gage set for the AFM8 miniature adjustable hand crimp tool (M22520/2-01). The set contains eight GO / NO-GO gages covering every selector position (SEL 1-8) of the tool, so the complete crimp-depth range can be verified without purchasing individual gages. Ideal for periodic calibration and for building a metrology standard.
How to use: set the AFM8 selector knob to the value marked on the K positioner data plate, insert the GO end of the matching gage and close the tool - the indenters must bottom fully on the GO member, and the NO-GO member must not fit. The standard check position for the AFM8 is SEL 8 (equivalent to the G125 gage, GO .0680 in / NO-GO .0730 in).
Gaging limits of indenters (M22520/1 and /2 system)
| SEL | GO (mm) | GO (in) | NO-GO (mm) | NO-GO (in) |
|---|---|---|---|---|
| 1 | 0.71 | 0.028 | 0.84 | 0.033 |
| 2 | 0.81 | 0.032 | 0.94 | 0.037 |
| 3 | 0.91 | 0.036 | 1.04 | 0.041 |
| 4 | 0.99 | 0.039 | 1.12 | 0.044 |
| 5 | 1.14 | 0.045 | 1.27 | 0.050 |
| 6 | 1.32 | 0.052 | 1.45 | 0.057 |
| 7 | 1.50 | 0.059 | 1.63 | 0.064 |
| 8 | 1.73 | 0.068 | 1.86 | 0.073 |
Periodic gaging is recommended to ensure accurate calibration and performance. Qualified to AS22520/3.
有限保修与责任限制
